Guitars and basses:
Pickups
Microphone/String Distance Chart
The adjustment is always done by plucking the strings at the last fret
Distance in millimeters
| Model | Position : | Neck | Middle | Bridge |
| With Vigier Floyd vibrato | E 1 | 0,5 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 2,5 | 1 mm above the pickguard | 3,5 | |
| With 2010/2011 vibrato | E 1 | 1,2 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Pickup in horizontal position | |
| Excalibur Shawn Lane | E 1 | 1 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur with hard tail | E 1 | 1 | 1 mm above the pickguard | As close as possible |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur Ultra 2010/2011 | E 1 | 1 | 4 mm | As close as possible, pulled vibrato |
| E 6 | 2,5 | Same | Same | |
| Excalibur 7 | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Expert with 2010/2011 vibrato | E 1 | 0,7 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 3 | 1 mm above the pickguard | Pickup in horizontal position | |
| Marilyn | E 1 | 2,5 | 1,5 | |
| E 6 | 5 | 2,5 | ||
| GV Metal | E 1 | 1,5 | 1 | |
| E 6 | 4 | 1,5 | ||
| GV Wood/Rock | E 1 | 1 | 0,5 | |
| E 6 | 4 | 1,5 | ||
| BFoot | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Basses | Sol | 2,5 | 1,5 | |
| Mi | 3,5 | 2,5 |
You can order any set of pickups from any other guitar in our line up (the Custom pickups in a Supra for instance.) The major exception here is the EMGs from the Ultra since they require a battery cavity that isn’t found on any other guitar.
If you change the bridge pickup you should use a pickup with F spacing (like a Seymour Duncan from the TB series), they are drilled for 6 screws and fit our pickguards.
If you replace the neck pickup you must use the standard series and therefore you have no other alternative than to drill additional 2mm holes in the base of the pickup to fit your pickguard.
We only have certain pickguard / color configurations in stock. Contact us to see what is possible.
Load More
Pickups
Microphone/String Distance Chart
The adjustment is always done by plucking the strings at the last fret
Distance in millimeters
| Model | Position : | Neck | Middle | Bridge |
| With Vigier Floyd vibrato | E 1 | 0,5 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 2,5 | 1 mm above the pickguard | 3,5 | |
| With 2010/2011 vibrato | E 1 | 1,2 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Pickup in horizontal position | |
| Excalibur Shawn Lane | E 1 | 1 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur with hard tail | E 1 | 1 | 1 mm above the pickguard | As close as possible |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur Ultra 2010/2011 | E 1 | 1 | 4 mm | As close as possible, pulled vibrato |
| E 6 | 2,5 | Same | Same | |
| Excalibur 7 | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Expert with 2010/2011 vibrato | E 1 | 0,7 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 3 | 1 mm above the pickguard | Pickup in horizontal position | |
| Marilyn | E 1 | 2,5 | 1,5 | |
| E 6 | 5 | 2,5 | ||
| GV Metal | E 1 | 1,5 | 1 | |
| E 6 | 4 | 1,5 | ||
| GV Wood/Rock | E 1 | 1 | 0,5 | |
| E 6 | 4 | 1,5 | ||
| BFoot | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Basses | Sol | 2,5 | 1,5 | |
| Mi | 3,5 | 2,5 |
You can order any set of pickups from any other guitar in our line up (the Custom pickups in a Supra for instance.) The major exception here is the EMGs from the Ultra since they require a battery cavity that isn’t found on any other guitar.
If you change the bridge pickup you should use a pickup with F spacing (like a Seymour Duncan from the TB series), they are drilled for 6 screws and fit our pickguards.
If you replace the neck pickup you must use the standard series and therefore you have no other alternative than to drill additional 2mm holes in the base of the pickup to fit your pickguard.
We only have certain pickguard / color configurations in stock. Contact us to see what is possible.
Load More
Pickups
Microphone/String Distance Chart
The adjustment is always done by plucking the strings at the last fret
Distance in millimeters
| Model | Position : | Neck | Middle | Bridge |
| With Vigier Floyd vibrato | E 1 | 0,5 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 2,5 | 1 mm above the pickguard | 3,5 | |
| With 2010/2011 vibrato | E 1 | 1,2 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Pickup in horizontal position | |
| Excalibur Shawn Lane | E 1 | 1 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur with hard tail | E 1 | 1 | 1 mm above the pickguard | As close as possible |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur Ultra 2010/2011 | E 1 | 1 | 4 mm | As close as possible, pulled vibrato |
| E 6 | 2,5 | Same | Same | |
| Excalibur 7 | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Expert with 2010/2011 vibrato | E 1 | 0,7 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 3 | 1 mm above the pickguard | Pickup in horizontal position | |
| Marilyn | E 1 | 2,5 | 1,5 | |
| E 6 | 5 | 2,5 | ||
| GV Metal | E 1 | 1,5 | 1 | |
| E 6 | 4 | 1,5 | ||
| GV Wood/Rock | E 1 | 1 | 0,5 | |
| E 6 | 4 | 1,5 | ||
| BFoot | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Basses | Sol | 2,5 | 1,5 | |
| Mi | 3,5 | 2,5 |
You can order any set of pickups from any other guitar in our line up (the Custom pickups in a Supra for instance.) The major exception here is the EMGs from the Ultra since they require a battery cavity that isn’t found on any other guitar.
If you change the bridge pickup you should use a pickup with F spacing (like a Seymour Duncan from the TB series), they are drilled for 6 screws and fit our pickguards.
If you replace the neck pickup you must use the standard series and therefore you have no other alternative than to drill additional 2mm holes in the base of the pickup to fit your pickguard.
We only have certain pickguard / color configurations in stock. Contact us to see what is possible.
Load More
Pickups
Microphone/String Distance Chart
The adjustment is always done by plucking the strings at the last fret
Distance in millimeters
| Model | Position : | Neck | Middle | Bridge |
| With Vigier Floyd vibrato | E 1 | 0,5 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 2,5 | 1 mm above the pickguard | 3,5 | |
| With 2010/2011 vibrato | E 1 | 1,2 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Pickup in horizontal position | |
| Excalibur Shawn Lane | E 1 | 1 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur with hard tail | E 1 | 1 | 1 mm above the pickguard | As close as possible |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur Ultra 2010/2011 | E 1 | 1 | 4 mm | As close as possible, pulled vibrato |
| E 6 | 2,5 | Same | Same | |
| Excalibur 7 | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Expert with 2010/2011 vibrato | E 1 | 0,7 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 3 | 1 mm above the pickguard | Pickup in horizontal position | |
| Marilyn | E 1 | 2,5 | 1,5 | |
| E 6 | 5 | 2,5 | ||
| GV Metal | E 1 | 1,5 | 1 | |
| E 6 | 4 | 1,5 | ||
| GV Wood/Rock | E 1 | 1 | 0,5 | |
| E 6 | 4 | 1,5 | ||
| BFoot | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Basses | Sol | 2,5 | 1,5 | |
| Mi | 3,5 | 2,5 |
You can order any set of pickups from any other guitar in our line up (the Custom pickups in a Supra for instance.) The major exception here is the EMGs from the Ultra since they require a battery cavity that isn’t found on any other guitar.
If you change the bridge pickup you should use a pickup with F spacing (like a Seymour Duncan from the TB series), they are drilled for 6 screws and fit our pickguards.
If you replace the neck pickup you must use the standard series and therefore you have no other alternative than to drill additional 2mm holes in the base of the pickup to fit your pickguard.
We only have certain pickguard / color configurations in stock. Contact us to see what is possible.
Load More
Pickups
Microphone/String Distance Chart
The adjustment is always done by plucking the strings at the last fret
Distance in millimeters
| Model | Position : | Neck | Middle | Bridge |
| With Vigier Floyd vibrato | E 1 | 0,5 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 2,5 | 1 mm above the pickguard | 3,5 | |
| With 2010/2011 vibrato | E 1 | 1,2 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Pickup in horizontal position | |
| Excalibur Shawn Lane | E 1 | 1 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur with hard tail | E 1 | 1 | 1 mm above the pickguard | As close as possible |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur Ultra 2010/2011 | E 1 | 1 | 4 mm | As close as possible, pulled vibrato |
| E 6 | 2,5 | Same | Same | |
| Excalibur 7 | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Expert with 2010/2011 vibrato | E 1 | 0,7 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 3 | 1 mm above the pickguard | Pickup in horizontal position | |
| Marilyn | E 1 | 2,5 | 1,5 | |
| E 6 | 5 | 2,5 | ||
| GV Metal | E 1 | 1,5 | 1 | |
| E 6 | 4 | 1,5 | ||
| GV Wood/Rock | E 1 | 1 | 0,5 | |
| E 6 | 4 | 1,5 | ||
| BFoot | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Basses | Sol | 2,5 | 1,5 | |
| Mi | 3,5 | 2,5 |
You can order any set of pickups from any other guitar in our line up (the Custom pickups in a Supra for instance.) The major exception here is the EMGs from the Ultra since they require a battery cavity that isn’t found on any other guitar.
If you change the bridge pickup you should use a pickup with F spacing (like a Seymour Duncan from the TB series), they are drilled for 6 screws and fit our pickguards.
If you replace the neck pickup you must use the standard series and therefore you have no other alternative than to drill additional 2mm holes in the base of the pickup to fit your pickguard.
We only have certain pickguard / color configurations in stock. Contact us to see what is possible.
Load More
Pickups
Microphone/String Distance Chart
The adjustment is always done by plucking the strings at the last fret
Distance in millimeters
| Model | Position : | Neck | Middle | Bridge |
| With Vigier Floyd vibrato | E 1 | 0,5 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 2,5 | 1 mm above the pickguard | 3,5 | |
| With 2010/2011 vibrato | E 1 | 1,2 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Pickup in horizontal position | |
| Excalibur Shawn Lane | E 1 | 1 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur with hard tail | E 1 | 1 | 1 mm above the pickguard | As close as possible |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur Ultra 2010/2011 | E 1 | 1 | 4 mm | As close as possible, pulled vibrato |
| E 6 | 2,5 | Same | Same | |
| Excalibur 7 | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Expert with 2010/2011 vibrato | E 1 | 0,7 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 3 | 1 mm above the pickguard | Pickup in horizontal position | |
| Marilyn | E 1 | 2,5 | 1,5 | |
| E 6 | 5 | 2,5 | ||
| GV Metal | E 1 | 1,5 | 1 | |
| E 6 | 4 | 1,5 | ||
| GV Wood/Rock | E 1 | 1 | 0,5 | |
| E 6 | 4 | 1,5 | ||
| BFoot | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Basses | Sol | 2,5 | 1,5 | |
| Mi | 3,5 | 2,5 |
You can order any set of pickups from any other guitar in our line up (the Custom pickups in a Supra for instance.) The major exception here is the EMGs from the Ultra since they require a battery cavity that isn’t found on any other guitar.
If you change the bridge pickup you should use a pickup with F spacing (like a Seymour Duncan from the TB series), they are drilled for 6 screws and fit our pickguards.
If you replace the neck pickup you must use the standard series and therefore you have no other alternative than to drill additional 2mm holes in the base of the pickup to fit your pickguard.
We only have certain pickguard / color configurations in stock. Contact us to see what is possible.
Load More
Pickups
Microphone/String Distance Chart
The adjustment is always done by plucking the strings at the last fret
Distance in millimeters
| Model | Position : | Neck | Middle | Bridge |
| With Vigier Floyd vibrato | E 1 | 0,5 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 2,5 | 1 mm above the pickguard | 3,5 | |
| With 2010/2011 vibrato | E 1 | 1,2 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Pickup in horizontal position | |
| Excalibur Shawn Lane | E 1 | 1 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur with hard tail | E 1 | 1 | 1 mm above the pickguard | As close as possible |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur Ultra 2010/2011 | E 1 | 1 | 4 mm | As close as possible, pulled vibrato |
| E 6 | 2,5 | Same | Same | |
| Excalibur 7 | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Expert with 2010/2011 vibrato | E 1 | 0,7 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 3 | 1 mm above the pickguard | Pickup in horizontal position | |
| Marilyn | E 1 | 2,5 | 1,5 | |
| E 6 | 5 | 2,5 | ||
| GV Metal | E 1 | 1,5 | 1 | |
| E 6 | 4 | 1,5 | ||
| GV Wood/Rock | E 1 | 1 | 0,5 | |
| E 6 | 4 | 1,5 | ||
| BFoot | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Basses | Sol | 2,5 | 1,5 | |
| Mi | 3,5 | 2,5 |
You can order any set of pickups from any other guitar in our line up (the Custom pickups in a Supra for instance.) The major exception here is the EMGs from the Ultra since they require a battery cavity that isn’t found on any other guitar.
If you change the bridge pickup you should use a pickup with F spacing (like a Seymour Duncan from the TB series), they are drilled for 6 screws and fit our pickguards.
If you replace the neck pickup you must use the standard series and therefore you have no other alternative than to drill additional 2mm holes in the base of the pickup to fit your pickguard.
We only have certain pickguard / color configurations in stock. Contact us to see what is possible.
Load More
Pickups
Microphone/String Distance Chart
The adjustment is always done by plucking the strings at the last fret
Distance in millimeters
| Model | Position : | Neck | Middle | Bridge |
| With Vigier Floyd vibrato | E 1 | 0,5 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 2,5 | 1 mm above the pickguard | 3,5 | |
| With 2010/2011 vibrato | E 1 | 1,2 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Pickup in horizontal position | |
| Excalibur Shawn Lane | E 1 | 1 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur with hard tail | E 1 | 1 | 1 mm above the pickguard | As close as possible |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur Ultra 2010/2011 | E 1 | 1 | 4 mm | As close as possible, pulled vibrato |
| E 6 | 2,5 | Same | Same | |
| Excalibur 7 | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Expert with 2010/2011 vibrato | E 1 | 0,7 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 3 | 1 mm above the pickguard | Pickup in horizontal position | |
| Marilyn | E 1 | 2,5 | 1,5 | |
| E 6 | 5 | 2,5 | ||
| GV Metal | E 1 | 1,5 | 1 | |
| E 6 | 4 | 1,5 | ||
| GV Wood/Rock | E 1 | 1 | 0,5 | |
| E 6 | 4 | 1,5 | ||
| BFoot | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Basses | Sol | 2,5 | 1,5 | |
| Mi | 3,5 | 2,5 |
You can order any set of pickups from any other guitar in our line up (the Custom pickups in a Supra for instance.) The major exception here is the EMGs from the Ultra since they require a battery cavity that isn’t found on any other guitar.
If you change the bridge pickup you should use a pickup with F spacing (like a Seymour Duncan from the TB series), they are drilled for 6 screws and fit our pickguards.
If you replace the neck pickup you must use the standard series and therefore you have no other alternative than to drill additional 2mm holes in the base of the pickup to fit your pickguard.
We only have certain pickguard / color configurations in stock. Contact us to see what is possible.
Load More
Endorsement:
Pickups
Microphone/String Distance Chart
The adjustment is always done by plucking the strings at the last fret
Distance in millimeters
| Model | Position : | Neck | Middle | Bridge |
| With Vigier Floyd vibrato | E 1 | 0,5 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 2,5 | 1 mm above the pickguard | 3,5 | |
| With 2010/2011 vibrato | E 1 | 1,2 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Pickup in horizontal position | |
| Excalibur Shawn Lane | E 1 | 1 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur with hard tail | E 1 | 1 | 1 mm above the pickguard | As close as possible |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur Ultra 2010/2011 | E 1 | 1 | 4 mm | As close as possible, pulled vibrato |
| E 6 | 2,5 | Same | Same | |
| Excalibur 7 | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Expert with 2010/2011 vibrato | E 1 | 0,7 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 3 | 1 mm above the pickguard | Pickup in horizontal position | |
| Marilyn | E 1 | 2,5 | 1,5 | |
| E 6 | 5 | 2,5 | ||
| GV Metal | E 1 | 1,5 | 1 | |
| E 6 | 4 | 1,5 | ||
| GV Wood/Rock | E 1 | 1 | 0,5 | |
| E 6 | 4 | 1,5 | ||
| BFoot | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Basses | Sol | 2,5 | 1,5 | |
| Mi | 3,5 | 2,5 |
You can order any set of pickups from any other guitar in our line up (the Custom pickups in a Supra for instance.) The major exception here is the EMGs from the Ultra since they require a battery cavity that isn’t found on any other guitar.
If you change the bridge pickup you should use a pickup with F spacing (like a Seymour Duncan from the TB series), they are drilled for 6 screws and fit our pickguards.
If you replace the neck pickup you must use the standard series and therefore you have no other alternative than to drill additional 2mm holes in the base of the pickup to fit your pickguard.
We only have certain pickguard / color configurations in stock. Contact us to see what is possible.
Load More
Miscellaneous:
Pickups
Microphone/String Distance Chart
The adjustment is always done by plucking the strings at the last fret
Distance in millimeters
| Model | Position : | Neck | Middle | Bridge |
| With Vigier Floyd vibrato | E 1 | 0,5 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 2,5 | 1 mm above the pickguard | 3,5 | |
| With 2010/2011 vibrato | E 1 | 1,2 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Pickup in horizontal position | |
| Excalibur Shawn Lane | E 1 | 1 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur with hard tail | E 1 | 1 | 1 mm above the pickguard | As close as possible |
| E 6 | 4 | 1 mm above the pickguard | Micro horizontal | |
| Excalibur Ultra 2010/2011 | E 1 | 1 | 4 mm | As close as possible, pulled vibrato |
| E 6 | 2,5 | Same | Same | |
| Excalibur 7 | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Expert with 2010/2011 vibrato | E 1 | 0,7 | 1 mm above the pickguard | As close as possible, pulled vibrato |
| E 6 | 3 | 1 mm above the pickguard | Pickup in horizontal position | |
| Marilyn | E 1 | 2,5 | 1,5 | |
| E 6 | 5 | 2,5 | ||
| GV Metal | E 1 | 1,5 | 1 | |
| E 6 | 4 | 1,5 | ||
| GV Wood/Rock | E 1 | 1 | 0,5 | |
| E 6 | 4 | 1,5 | ||
| BFoot | E 1 | 0,5 | 0,5 | |
| E 6 | 2,5 | Same | ||
| Basses | Sol | 2,5 | 1,5 | |
| Mi | 3,5 | 2,5 |
You can order any set of pickups from any other guitar in our line up (the Custom pickups in a Supra for instance.) The major exception here is the EMGs from the Ultra since they require a battery cavity that isn’t found on any other guitar.
If you change the bridge pickup you should use a pickup with F spacing (like a Seymour Duncan from the TB series), they are drilled for 6 screws and fit our pickguards.
If you replace the neck pickup you must use the standard series and therefore you have no other alternative than to drill additional 2mm holes in the base of the pickup to fit your pickguard.
We only have certain pickguard / color configurations in stock. Contact us to see what is possible.
