Page 1 of 1
Reset Supra pickup height to default factory settings
Posted: 08 Nov 2019 05:52
by perca
Hi - I recently became the happy owner of a 10y old Excalibur Supra
The previous owner has done significant changes to the pickup heights and I want to reset it to the pickup setup which was used originally. Can someone help me find the default spacing between the pickups and the strings (top/bottom) for this HSH combination? Do you measure with open strings? Hope someone can help. Thanks in advance :)
Reset Supra pickup height to default factory settings
Posted: 08 Nov 2019 13:23
by yuri1973
CHECK THIS OUT:
http://www.vigier.fr/forum/message.php?id_question=5677
Reset Supra pickup height to default factory settings
Posted: 08 Nov 2019 15:06
by perca
Awesome - thanks for the fast response!
Re: Reset Supra pickup height to default factory settings
Posted: 06 Mar 2022 16:17
by jaguar
Hi, digging up an old thread as the link doesn't work.
Would anyone know the default factory settings for the bridge pickup in a GV Wood?
Re: Reset Supra pickup height to default factory settings
Posted: 07 Mar 2022 11:52
by yuri1973
Found this table....
| Modèle |
Position : |
Grave |
Centre |
Aigu |
| Floyd |
Mi 1 |
0,5 |
1 mm au dessus de la plaque |
Au plus près vibrato tiré |
| |
Mi 6 |
2,5 |
1 mm au dessus de la plaque |
3,5 |
| S/SP |
Mi 1 |
1,2 |
1 mm au dessus de la plaque |
Au plus près vibrato tiré |
| |
Mi 6 |
4 |
1 mm au dessus de la plaque |
Micro horizontal |
| SL |
Mi 1 |
1 |
1 mm au dessus de la plaque |
Au plus près |
| |
Mi 6 |
4 |
1 mm au dessus de la plaque |
Micro horizontal |
| SF/SPF |
Mi 1 |
1 |
1 mm au dessus de la plaque |
Au plus près |
| |
Mi 6 |
4 |
1 mm au dessus de la plaque |
Micro horizontal |
| VEX |
Mi 1 |
0,7 |
1 mm au dessus de la plaque |
Au plus près vibrato tiré |
| |
Mi 6 |
3 |
1 mm au dessus de la plaque |
Micro horizontal |
| VM6 |
Mi1 |
2,5 |
|
1,5 |
| |
Mi 6 |
5 |
|
2,5 |
| GVM |
Mi 1 |
1,5 |
|
1 |
| |
Mi 6 |
4 |
|
1,5 |
| GVW,R |
Mi 1 |
1 |
|
0,5 |
| |
Mi 6 |
4 |
|
1,5 |
| U, VE7 |
Mi 1 |
1 |
4 mm |
Au plus près vibrato tiré |
| |
Mi 6 |
2,5 |
Idem |
Idem |
| BFoot |
Mi 1 |
0,5 |
|
0,5 |
| |
Mi 6 |
2,5 |
|
Idem |
| Basses |
sol |
2,5 |
|
1,5 |
| |
Mi |
3,5 |
|
2,5 |
Re: Reset Supra pickup height to default factory settings
Posted: 07 Mar 2022 23:39
by jaguar
Great, thanks for sharing!
I would read it as follows.
GV Wood, or Rock:
Neck pickup: 1 on high E string; 4 on low E string.
Bridge pickup: 0,5 on high E string; 1,5 on low E string.
Although, I don't know if I'm reading it well...
Would those be millimeters between the humbucker and the string ?
Would it be while fretting at the top fret?
I wonder as 0,5mm would seem very, very close. Even if it's the high E, pretty much touching the string.
Re: Reset Supra pickup height to default factory settings
Posted: 14 Mar 2022 17:28
by 1Patrice Vigier
Press the string on the last fret and measure top pole piece to bottom of string