Vigier Guitars

ztevie

<r><QUOTE author="ztevie"><s>[quote="ztevie"]</s> There is something I don't understand (and maybe that's because I haven't had the courage to open my Excalibur yet), but from the first part of your description I understand that there is a hole in the middel of the plate and...

ztevie

<r><QUOTE author="ztevie"><s>[quote="ztevie"]</s> I had a similar problem when * Seymour Duncan's into an Ibanez Universe, screws, p/up-pickguard size etc…the fun of mods!! So after all the effort what is the soun...

ztevie

If you're about to swap pickups, I made a thread about it since there are potential difficulties doing it in a Vigier. Read it and you may have some help:

http://vigierguitars.com/forum/message.php?id_question=5122

ztevie

<r>Thanks! Ok so the weight difference is the maple top/phenowood and the price difference is basically the finish... Wood is definitely the most tempting one regarding looks, but Metal is clearly most bang for the buck since it's so much cheaper. I'm not so ke...

ztevie

Oh forgot about NAMM...

Of course you should get it to play as great as it possibly can! :)

ztevie

<r>I just know that my Shawn Lane and the Bumblefoot signature is setup as dive only from factory. The others i don't know about. Still, i think you should lower the trem as much as possible while still having a nice tone without buzz. Then measure the action on 12th fret,...

ztevie

<r>Without being an expert on thios matter, I can't imagine a trem set to dive only would effect the string action being more even across the board? I mean, you seem to have plenty of headroom to adjust the height of the trem up and down. Did you buy it used or new? Awkward if ...

ztevie

<r>I could do another test for you here in the very North of Sweden. We've had around -35 degrees Celsius here all week, that's about - 31 Fahrenheit. Last night was a peak down to - 41 C. (-42F) I could leave my Shawn Lane out one night if you guarantee it won't get hurt? I...

ztevie

Hi! I've found the obvious differences between Wood, Rock and Metal like rosewood board on 2 of them, different pickups and colors, a maple top on the Wood model. But are there any other differences, like in body thickness? I'm thinking since thery have different weight th...

ztevie

Hi! So yesterday was the day for changing pickups in my Shawn Lane model. I came across a couple of difficulties and thought I'd share it here, maybe it'll help someone else planning to do the same. I swapped both humbuckers, not the middle single coil. The Air Classics ar...

ztevie

<r>Yeah, I hope they will meet the huge expectations I have on them. I never tried Suhr pickups but I've been curious for a set of Aldrich pups. A favourite pickup I have is the Tom Anderson HN3 for the bridge. Plenty of mids in the right frequencies while retaining good, tight lows a...

ztevie

<r>Yeah, 500k pots will remove some treble. I didn't find the Air Classics lack body/bass though? I thought they were pretty well balanced for the guitar, but since I like to play "rockier" stuff than what Shawn Lane did I do find them too weak for my taste. The guitar is on the brigh...

ztevie

<r>More powerful pickups won't automatically give you a thicker tone. DiMarzio Air Classics are definitely not the thinnest pickups either. According to the DiMarzio tone chart they are pretty even across the tone spectra. But there are thicker pickups out there, for DiMarzio, Tone Zo...

ztevie

Great! I was confused since there's been some talk of having to drill new holes. But i understand that's the case if you put in another brand beside DiMarzio since pup plates are much wider. Replacing with DiMarzios is a piece of cake then!

ztevie

<r>Great Ben, thanks! Just a clarification: I thought that the DiMarzio pickups mounted on the Vigier had plates specially made for Vigier with 2 holes on the treble side? Are you saying they are really normal DiMarzio pickups with normal plates, and that Vigier makes a smaller plat...

ztevie

Yeah, even if no vigier staff is around someone here must have changed pickups before and can tell us about this.

ztevie

Hi! The Vigiers with pickguard have 3 mounting holes for each humbucker, while normal humbuckers have only 2 (1 each side). My understanding was that if I need to replace pickups I need to either: a) drill 2 new holes of the treble side on the pup plate. b) Or, if I us...

Vigier Guitars

Search found 17 matches

Vigier pickup change...

Vigier pickup change...

CShawn Lane Vigier sounds thin? Pickup change?

Differences GV models?

Vigier Escalibur special Bridge adjustments

Vigier Escalibur special Bridge adjustments

Vigier Escalibur special Bridge adjustments

NAMM 2016 PREVIEW: One Neck to Rule Them All

Differences GV models?

Vigier pickup change...

CShawn Lane Vigier sounds thin? Pickup change?

CShawn Lane Vigier sounds thin? Pickup change?

CShawn Lane Vigier sounds thin? Pickup change?

Change pickups on a Shawn Lane?

Change pickups on a Shawn Lane?

Change pickups on a Shawn Lane?

Change pickups on a Shawn Lane?