Pickups

The Excalibur Bfoot is equipped with a DiMarzio Tone Zone and a Chopper. They are set at a perfect distance from the strings and are fixed directly on the body to keep them from vibrating. This is important for players who like to play at high volumes because feedback is cut.

Electronics

We sprayed a shielder inside the electronic cavity to reduce hum when playing at high volumes. The wiring is meticulously done and our brand choices for electronic parts are DiMarzio and Switchcraft. The controls are comprised of volume, tone, and a five-way switch that allow you to select or combine the pickups as follows:

1 HUMBUCKER & 1 SINGLE-COIL

1 Chopper in neck position

2 Chopper in neck & Tone Zone in bridge position, out of phase

3 Chopper in neck & Tone Zone in bridge position

4 Tone Zone in bridge position, in single coil

5 Tone Zone in bridge position


Output

To prevent your guitar cable from being pulled out while you’re playing, or connect a transmitter, we recessed the output jack into the edge of the body.